Brakes/Levers/Pads

No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance. - An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.

- Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

Light and smooth, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash. This ambidextrous lever can be used as a front or rear, too.

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.

Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.

Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.

Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.

- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads

- Exceptional heat management - Rounded edge - UCI approved for road competition

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Aluminum spider center lock rotor mount system - Includes standard type rotor lockring - For use with resin or metal pads - Requires external-type rotor lockring when installing onto 15/20mm axle hub - 160, 180, and 203mm rotors available - 12g lighter than SM-RT62

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders Features: - Water Grooves - Dual Compound - Rim Friendly Compounds: - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.

Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT DIRECT MOUNT - 78.4 grams* (Front) - 78.2 grams* (Rear) *Pads not included WARRANTY - 3 Years

Shimano 105 BR-R7070 Ice Tech Disc Brake Caliper Flat Mount Utilizing Shimano’s lightweight and sleek flat mount design, the BR-R7070 hydraulic disc brake caliper features premium stopping power and aerodynamics for road applications. The new SM-RT70 rotor offers Ice Technologies construction for excellent heat management for confident performance on the longest descents. - Increased rider control in all conditions - Sleek Flat Mount design integrates seamlessly into a road bike’s aero profile - Ceramic pistons - Recommended brake lever: ST-R7020, ST-R7025 - Recommended rotor: SM-RT70 - Caliper fixing bolt (4 mm) made of steel - Application: Cyclocross, Gravel, Road - Brake Type: hydraulic, 2 pistons - Hydraulic Fluid: mineral oil - Hose: SM-BH90 (not included)

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders

The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

Ideal pad for everyday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

Excellent modulation, cooler temperatures and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. Fits: - SRAM | Shimano road

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro - HD-R310 REVER - MCX1 Flat Mount

Characteristics: High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Design: - low profile shape - each Flash EVO pad is 0.75mm narrower then a FlashPro pad for a total of 1.5mm more clearance for wide rims - 4 asymmetric cut outs - direct mount caliper compatible Fits: - SRAM Road - Shimano Road - CAMPA Potenza 2016 - CAMPA Athena 2016 - CAMPA Veloce 2016

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Magura - MT 2,4,6,8 Campagnolo - Road Disc

Road Sport pads feature a quality replaceable pad insert for easy maintenance. - Color: Red - Intended Brake Type: Caliper - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems

- Stainless steel shim helps center the rotor perfectly within the disc brake caliper - Great for swapping wheelsets without the threat of brake drag